Diastered and Regiochemical Control in the Functionalization of the Allylic [dbnd] of a Natural 5-(1-Alkenyl)-2-Enono-1,5-Lactone

The diastereo and regioselectivity of the bromohydrination of argentilactona [(5R)-(-)-δ-lactone of 5-hydroxydodeca-Z, Z-2,6-dienoic acid] and the regioselectivity of the aqueous acidic opening of its 65,75 and 6R,7R-epoxides were studied. Although the reactions occurred with low diasterofacial control, the regioselectivity observed in all cases was high, suggesting that the sequences could be of some synthetic value.     

Catalyst-free synthesis of benzodiazepines and benzimidazoles using glycerol as recyclable solvent

We described herein the use of glycerol as solvent in the catalyst-free synthesis of benzodiazepines and benzimidazoles. This simple and efficient method furnishes the corresponding 1-H-1,5-benzodiazepines and 1,2-disubstituted benzimidazoles in good yields by the condensation of o-phenylenediamine with several ketones and aldehydes, respectively. In addition, glycerol can be easily re-utilized for further condensation reactions up to four times without lost of activity.     

Classification and determination of total protein in milk powder using near infrared reflectance spectrometry and the successive projections algorithm for variable selection

This paper proposes a methodology for the classification and determination of total protein in milk powder using near infrared reflectance spectrometry (NIRS) and variable selection. Two brands of milk powder were acquired from three Brazilian cities (Natal-RN, Salvador-BA and Rio de Janeiro-RJ). The protein content of 38 samples was determined by the Kjeldahl method and NIRS analysis. Principal component regression (PCR) and partial least squares (PLS) multivariate calibrations were used to predict the total protein. Soft independent modeling of class analogy (SIMCA) was also used for full-spectrum classification, resulting in almost 100% classification accuracy, regardless of the significance level adopted for the F-test. Using this strategy, it was feasible to classify powder milk rapidly and nondestructively without the need for various analytical determinations. Concerning the multivariate calibration models, the results show that PCR, PLS and MLR-SPA models are good for predicting total protein in powder milk; the respective root mean square errors of prediction (RMSEP) were 0.28 (PCR), 0.25 (PLS), 0.11 wt% (MLR-SPA) with an average sample protein content of 8.1 wt%. The results obtained in this investigation suggest that the proposed methodology is a promising alternative for the determination of total protein in milk powder.     

Development of a new reference material for the validation of molecular detection methods for microbiological analysis

The standard methodology used for the detection of bacteria in environmental samples and food is primarily based on bacterial growth on specific culture media and confirmation by biochemical and/or immunological tests of all presumptive colonies. However, this methodology presents a number of drawbacks, such as low sensitivity and specificity, and the long time needed to obtain results. For this reason, the implementation of molecular methods in diagnostic laboratories has increased over the past several years. Nevertheless, most of these newer methods have not been included in current legislation, and, in most of cases, they have not yet been normalized. In this sense, the availability of appropriate reference materials (RMs) can help to overcome these deficiencies. The aim of this study was to develop and validate, following ISO Guide 34, a new RM, in a tablet format, for the quantification of Legionella pneumophila and Salmonella spp. by quantitative PCR (qPCR). This new RM can be used as a work reference sample in internal quality control, in the organization of proficiency testing schemes (PTS), as well as for the validation of molecular methods based on qPCR.     

Sequential injection methodology for carbon speciation in bathing waters

A sequential injection method (SIA) for carbon speciation in inland bathing waters was developed comprising, in a single manifold, the determination of dissolved inorganic carbon (DIC), free dissolved carbon dioxide (CO₂), total carbon (TC), dissolved organic carbon and alkalinity. The determination of DIC, CO₂ and TC was based on colour change of bromothymol blue (660 nm) after CO₂ diffusion through a hydrophobic membrane placed in a gas diffusion unit (GDU). For the DIC determination, an in-line acidification prior to the GDU was performed and, for the TC determination, an in-line UV photo-oxidation of the sample prior to GDU ensured the conversion of all carbon forms into CO₂. Dissolved organic carbon (DOC) was determined by subtracting the obtained DIC value from the TC obtained value. The determination of alkalinity was based on the spectrophotometric measurement of bromocresol green colour change (611 nm) after reaction with acetic acid. The developed SIA method enabled the determination of DIC (0.24–3.5 mg C L⁻¹), CO₂ (1.0–10 mg C L⁻¹), TC (0.50–4.0 mg C L⁻¹) and alkalinity (1.2–4.7 mg C L⁻¹ and 4.7–19 mg C L⁻¹) with limits of detection of: 9.5 μg C L⁻¹, 20 μg C L⁻¹, 0.21 mg C L⁻¹, 0.32 mg C L⁻¹, respectively. The SIA system was effectively applied to inland bathing waters and the results showed good agreement with reference procedures.     

Local environment influence on the optical properties of block copolymers containing an epoxy-based azo-prepolymer

The aim of this contribution was the study of the influence of polymer matrix on the photo-induced orientation of azobenzene groups. Notably, an azo-prepolymer bearing hydroxyl groups was selectively confined in self-assembled phases of different block copolymers, randomly-epoxidized polystyrene-b-polybutadiene-b-polystyrene (SBSep) and polystyrene-b-poly-4-vinylpyridine (S4VP). The formation of hydrogen bonds between the azo-prepolymer and poly-4-vinylpyridine block, as well as the effect of the local environment surrounding the azo-prepolymer were investigated by Fourier transform infrared and ultraviolet–visible spectroscopies. In addition, the reversible optical storage properties of the developed materials were also studied. Birefringent properties of the systems based on S4VP were strongly enhanced by intermolecular interactions with the azo-prepolymer. Specifically, the maximum birefringence level attained by a system containing 13 wt% of azobenzene was around 2.3 × 10⁻² and its remaining birefringence was nearly three times higher than that of the neat azo-prepolymer. Furthermore, a morphological analysis of the designed materials was carried out by atomic force microscopy. Taking into account that the control of the microdomains ordering in block copolymer films is of current interest, special attention was focused on the influence of different variables on the arrangement of the block copolymer microdomains.     

Effect of grinding method on the analysis of essential oil from <Emphasis Type="Italic">Baccharis articulata</Emphasis> (Lam.) Pers.

Grinding methods were evaluated aiming to determine yield and composition of essential oils (EOs) from Baccharis articulata (Lam) Pers., called as carqueja, a native plant from South Brazil. Cryogenic, knife (with and without cooling) and ball mills were used. The major constituents found in EOs were β-pinene, caryophyllene, spathulenol and caryophyllene oxide, but differences in 21 compounds were observed. All grinding processes reduced monoterpenes and oxygenated sesquiterpenes with concentration of hydrocarbon sesquiterpenes. The sesquiterpenes (hydrocarbons and oxygenated) were found from 63.55 to 86.02% while the monoterpene hydrocarbons’ concentration ranged from 13.98 to 36.45%. Plants milled with knife mill provided EOs with profile similar to those not grinded. Despite the lower working temperature, cryogenic milling resulted in smaller EO yield (0.40 ± 0.03%) in comparison to other grinding methods (yields from 0.50 ± 0.02 to 0.56 ± 0.03%) and different chromatographic profile. Microscopic analysis showed the smaller particle size provided by cryogenic grinding, which leads to glandular trichome rupture and consequently to loss of EOs. This study showed that grinding should be carefully evaluated to provide reproducible results in essential oil analysis.     

A note on the generalized Rayleigh equation: limit cycles and stability

The aim of the present paper is to give an analytical proof on the existence and stability of the limit cycles in the generalized Rayleigh equation, which models diabetic chemical processes through a constant area duct where the effect of heat addition or rejection is considered, ${\frac{d^{2}x}{dt^{2}}+x = \varepsilon(1-(\frac{dx}{dt}) ^{2n})\,\frac{dx}{dt}}$ where n is a positive integer and ε a small real parameter. The main tool used for it is the averaging theory.     

Response surface optimisation applied to a headspace-solid phase microextraction-gas chromatography-mass spectrometry method for the analysis of volatile organic compounds in water matrices

A new method for the simultaneous determination of 12 volatile organic compounds (trans-1,2-dichloroethene, 1,1,1-trichloroethane, benzene, 1,2-dichloroethane, trichloroethene, toluene, 1,1,2-trichloroethane, tetrachloroethene, ethylbenzene, m-, p-, o-xylene) in water samples by headspace solid phase microextraction (HS–SPME)–gas chromatography mass spectrometry (GC–MS) was described, using a 100?µm PDMS (polydimethylsiloxane) coated fibre. The response surface methodology was used to optimise the effect of the extraction time and temperature, as well as the influence of the salt addition in the extraction process. Optimal conditions were extraction time and temperature of 30?min and ?20°C, respectively, and NaCl concentration of 4?mol?L^?1. The detection limits were in the range of 1.1?×?10^?3–2.3?µg?L^?1 for the 12 volatile organic compounds (VOCs). Global uncertainties were in the range of 4–68%, when concentrations decrease from 250?µg?L^?1 down to the limits of quantification. The method proved adequate to detect VOCs in six river samples.